Trolling Rigs For Lake Trout You Need To Know

Trolling trout is the most effective way to catch them because the trout in the trolling are dispersed over large areas, so you need to cover a lot of water to find each individual.

Still, trolling for lakers is more complicated than any other type of lake trout fishing and requires having the proper trolling set up to succeed with this system. 

This composition will cover the stylish lake trout trolling equipment and explain how to tie them, when to use them, and what’s immaculately suitable.

How to rig for trolling lake trout 

The best trolling rig for trout in the lake:

  • 3-way rig
  • Spin-n-Glo rig
  • Dodger rig
  • Cowbell rig

The excellent thing about this device is that you can match and mix them in different combinations, and they enable you to comb for lake trout with a downrigger or not.

Now let’s go into the details and look at each of these equipage more nearly to decide which bone is stylish for your purposes. 

3- way rig for lake trout 

This is a tremendous each-around trolling rig for lake trout and works exceptionally well in spring when lake trout are planted in further shallow waters. 

Tying it: Start by connecting your main line to a three-way swivel. The stylish main conduit for this is a 20 to 30 lb test plat. Next, tie a 1- bottom dropper line to another eye of the three-way rotate. The drip line must be weaker than your mainline (if your weight gets snared at the bottom), and I prefer to use the 10 to 15 lb test mono.

Tying a 2 to 8 oz ball to the end of your drip line or using a swivel can allow you to change the mass quickly. Also, tie a 2 to a 3- bottom leader to the third eye of the three-way rotation and tie a swivel at the end that you can also attach to a lake trout bait. 

The stylish leader is 15 to 20 lb test fluorocarbon, and again you should use a line that’s weaker than your mainline in case your lure gets snared, in which case you won’t lose your whole rig. 

When to use it This is an excellent rig for near- reinforcement trolling in spring and afterlife, when lake trout tend to push into the shallow water of 20 or 30 bases depth. You can acclimate the depth by changing the size of the weight and by how numerous lines you let out the back of your ship.

How to use it: You should use a fish finder to find the aquatic terrain and look for cruising lakers and seminaries of baitfish that will tend to attract them. When using a three-way rig for lake trout, always maintain nethermost contact because this is where most of the fish are gathered. A great strategy is to use a planer board with about 6 to 8 trolling lines to test different lures and explore depth simultaneously.

Spin- n-Glo rig for lake trout

The spin-n-Glo rig is an excellent bait donation for lake trout trolling and can be combined either with a three-way rig, lead core trolling, or the down transporter.

How to tie it: If you use the spin-n-Glo set up with a three-way rig, start by setting up the three-way rig as bandied over, but instead of tying the leader to a quick swivel, thread a size 2 or 4 spin-n-Glo zippers to the end of your head. Next, thread on 2 to 4 plastic globules behind the spin-n-Glo bobber and tie on a size two treble hook.

When to use it: This is a tremendous trolling rig for lake trout that you can use during the open water season and works well for both shallow and deep water trolling. 

Use it: If you’re using a spin-n-Glo rig for shallow lake trout, try to get your rig near the bottom (the rig works in about 30 feet of water with a weight of 8 oz). You can use lead core search or a debugger to get even more depth when you want to troll deeper than that.

Digging dodgers for lake trout

Dodgers are another type of lure that works well against trout in the aquarium and can be easily used with various lures and combinations with different trolling fish setups.

How to tie it: To function more accurately, a dodger fish needs to have about 2 to 3 feet in front of it, allowing it to sway back and forth in the water optimally. Start by threading your mainstream through the eye of a quick-rotating joint and then through a bead of glass. Next, tie your main rope to a barrel spindle, then connect the 2- to 3-foot monofilament to the other eye of the swivel.

Next, tie the dodger to the single lead and connect the second to the other end of the slider. The alternate leader should be 10 to 15 lb test fluorocarbon and about one bottom long. The leader’s finish is then tied to a lure (or a quick spin accompanied by surprise).

When to use it: The dodger trout setup is another excellent option for exploring deepwater trout with predators, but it can also be used with a three-way rig or with a lead core line. Like the crawling tortoise rig, it makes lots of noises and flickers in the water, helping to attract lakers from far and wide.

How to use it: Like a bull sled, the dodger makes lots of noises and flashes in the water, helping to attract lakers from far and wide. Because of this, it’s ideal when you have to cover a lot of ground in a hunt for deep water lake trout and is stylishly combed with a downrigger.

Cowbell trolling rig for lake trout

The cowbell trout rig is a classic lure that still works for lake trout and trout.

How to tie it: The stylish option is to get a ready-made cowbell setup consisting of a nan essence line with 4 to 10 incentive blades attached. At the bottom end of this setup is a swivel joint, which you’ll connect to a 1-foot top with your aquarium trout lure strapped to the end of it. At the top end of the cowbell, the rig is a rudder, which helps prevent the blades’ spinning from twisting your mainline. Force your mainline to rotate at the end of this.

When to use it: This is an excellent choice for trolling on large lakes where you need a lot of ground to find lake trout. The swingarms of the barbell can rotate around the wire because they are fitted with a gap. You are creating a lot of vibrations and flickers in the water. This commotion attracts lake trout in a wide radius around your boat, which helps to cover a lot of ground.

How to use it: This rig is commonly used with a downrigger for trolling deep water lake trout in the summer. You can combine it with standard trolling lures, such as lake trout spoons, crankbaits, or spin-n-Glo rigs. 

Trolling for lake trout without downriggers

Downriggers are well-suited to catching deepwater trout during the hottest part of summer. They are ideal for targeting water over 60 feet deep, which is hard to achieve with any other method of catching trout. Since learners can often be planted in water more than 100 bases deep in July and August, jungle trolling is one of the more stylish ways to target them at this point.

Lake trout are strictly cold water fish and need temperatures around 58 degrees to thrive. So when the water surface warms up in the summer, they recede into deeper and deeper waters. 

It’s essential to use a fish finder since that will allow you to pinpoint the depth they hold and then set your downrigger to precisely the correct depth. 

Trolling for lake trout with downriggers

While downriggers are great for trolling deep water lake trout, you can readily explore in depths up to 60 feet without using downriggers. TThe stylish way to do this is with the lead core line, which is designed to sink briskly in the water, and you can combine a lead core line with a snap-on weight, similar to a dive lemon, to reach minimal depths.

Like trolling with a downrigger, it’s best to use a fish finder to determine what depth the lake trout are hiding, as that will save you a lot of time checking out other depth ranges together. Once you’ve planted to the correct depth, you can also place all of your lanes at the same depth to increase your chances of catching further layers.

Tips

Trolling with a lead rig requires using a downrigger, a diver, a current counter, and a fat line. Because lake trout average 10 pounds and often grow to 20, 30, and even 40 pounds, it pays to equip them with the correct tackle.

Most trout carts use a fluorocarbon line as the lead material, and depending on the rig being used, a line size in the 17 to 30 pounds test range is most appropriate.

Conclusion

The lake trout is a denial of the deep and fascinating rigs that are how anglers “know well” catch these fish day in and day out. I hope this information will help you catch lots of trout on your upcoming fishing trips. Read more articles on our website for more details.

Read more: Best Spinning Reels Under $50 (Top 7 Fishing Spinning Reel)