If you want your baitcasting reel to run as smoothly as new for the rest of its life, you must oil and clean it. The reason is that both oiling and cleaning extend the longevity of baitcaster. So, how do you oil a baitcasting reel?
Oiling a baitcasting reel is not difficult or time-consuming. You can effectively lubricate your baitcasting reel in under 10 minutes if you are the know-how. Today, we will discuss detailed steps on how do you oil a baitcasting reel. Come on! We need 10 minutes only.
What Do You Need?
- Fishing Reel Oil
- Clean Water
- Paper Towels
- Screwdrivers
- Cotton Q-Tips
Read more: Best Baitcasting Reel Under $100 (Top 6 Baitcasters)
6 Steps How To Do You Oil a Baitcasting Reel
Before starting, try to check your spool a baitcasting reel, does it work your reel is smooth? If you feel the right time to oil, proceed with the steps below:
Step 1: Use A Tape To Seal The Line
If you are a frequent angler, your reel spool is almost certainly full of line. Okay, if the spool is already loaded with the line, you don’t have to remove it because it will be a hassle.
Please take a little piece of tape and seal the line’s slack end, so it does not come out.
Step 2: Remove The Side Plate
Are you familiar with the term “side plate”? If you don’t, no problem! The component of the reel opposite the handle is the side plate. Interestingly, the ways to open the side plate vary in different reels.
There should be a screw; remove the screw, and the side plate should fall loose.
Step 3: Remove The Handle And Any Other Removable Pieces
Remove the handle after you’ve removed the side plate. You must undo a screw in the handle’s middle to remove it. The top will come off when you undo the screw. The nut must then be unscrewed with a wrench.
Continue removing parts in this manner. The most important thing you should remember when drawing the piece is to document the entire process from start to finish.
Most newbies get confused because they forget what to add after what. As a result, a video recording will prevent you from making mistakes.
Step 4: Oil A Baitcasting Reel In The Bearings And Other Spinning Parts
There are two bearings, one little and the other medium, both with the oil! Please use high-quality oil because cheap oil might cause more damage.
Step 5: Open The Gear Oil Door
A small gate sealed with a screw designed to grease the gear can be found beneath the reel. You can open the entire gear region if you wish. Still, I wouldn’t recommend it for newbies because it’s a very important and sensitive area.
Unscrew the gate, and the gear should be visible. Place four drops of oil into the reel and continue to turn the handle. The inside part will be rotating.
Step 6: Attach All The Parts
Attach all of the parts you removed. Attach the side plate, handle, and everything else you took out!
Are you perplexed? Don’t worry; you can watch the record! That is quite helpful.
Why Should We Oil A Baitcasting Reel?
Well, definitely should. Most model baitcasting reels should be oiled before first use, as the reels are often not filled with oil when you first buy them.
The reels are made of many components, and the most important ones that need oiling is the moving parts. Oil reduces friction and temperature, as well as protects these parts from corrosion. Some oils have anti-corrosion properties, so using them will be beneficial.
Before applying oil, you must clean the reel thoroughly. Adding oil to a part that is dusty or contains any kind of residue will do more harm than good. Because the oil will keep dirt and small particles will rub against the rotating shaft parts each time you use it, causing damage.
How Often Should I Oil A Baitcasting Reel?
Before oiling your baitcasting reel, you should know how often to do it. There is no universal answer to this question and it depends a lot on how often you use the reel and on the type of reel.
Cleaning should be done after each use and more thorough oiling should be done at least once a year. Of course, when you remove the parts, you should also grease the components from time to time.
Recreational anglers will often fish on weekends and vacations. So they can oil it once or twice a year. Professional anglers will of course do it more often than usual twice a year, but I’m sure they know everything about it.
There is a rule that you should follow, which is not to apply the oil several times too much. Some anglers will say they do it monthly, but that’s not necessary if you don’t fish regularly. And do not take a long time when your reel has signs of oil lacking. These all significantly reduce the life of the reel.
What Can I Use To Oil A Baitcasting Reel?
What can be used to oil for baitcaster, this is a question many anglers are concerned about. There is a lot of information being shared on the internet, and the point is that you should go ahead and dig into it.
I always recommend using quality oil and branded products for cleaning. These oils can be a bit more expensive, but it will be more economical if your reel is durable after many years of use. There are many brands available and all of these are manufactured with anti-corrosion properties and other features to ensure maximum spindle performance.
You cannot use the same oil on all parts of the reel. Oils have different physical properties, especially greases have more reduced friction. At least at room temperature, grease is solid, while oil is liquid. Grease also partially acts as a sealant. Oils are good for all fast-moving parts that are not subject to too much pressure.
Look for good quality oils that have high thermal stability, anti-corrosion and water-resistant properties. You should avoid silicone-based lubricants for the reels. Avoid those that contain TFE as it will solidify on the reels. Also, avoid using the popular WD-40 to clean/lubricate the spindle. When WD-40 dries, it leaves a thin film on dust-accumulating surfaces.
Conclusion
This article how do you oil a baitcasting reel is talk about the most simple method described. It’s a quick and straightforward guide for those who have never done any oiling before. However, when removing the parts, be cautious and do not force anything; otherwise, you will damage the reel. If you’re seeking high-quality fishing equipment, please visit my website.