Can You Put Fluorocarbon On A Baitcaster

We earn commissions as an affiliate on qualifying purchases made on our website. Many people have different ideas about which fishing line is best and when you should use it. Most people I know use braided lines on their baitcasting reels. If you use anything heavier than 8 lbs, you’ll have many issues, and your performance will suffer. Tangles will occur, and you will be unable to cast far. You could catch fish with a lighter line, but it would be more difficult. 

So, can you put fluorocarbon on a baitcaster? In this post, I’ll discuss whether or not you can use fluorocarbon on your baitcasting reel.

Why Fluorocarbon Doesn’t Work

That will be fine if you want to use a lighter fluorocarbon on your baitcaster. You’re most likely fishing for larger fish, which means you’ll need something heavier. I discovered that anything more severe than an 8 lb test causes problems. Under 8 lbs worked well but wasn’t as smooth as braid. If you use heavier fluoro on your baitcaster, it will not cast very far. The line will be too thick, causing much friction and making you feel like you’ve never cast a fishing rod before. If you’re not throwing, this won’t matter, but I assume you are. The second thing I noticed is that it quickly becomes tangled (with a heavier line). You’ll probably feel like you have to give it some power to cast out, which is where the problems arise. I’m not sure about you, but I’d rather spend my time fishing than cleaning my reels several times daily.

The Best Line For A Baitcaster

I don’t think choosing which braided line to use is a big deal. I haven’t tried all of the braided lines, but the ones I have attempted to have all been pretty good. It wasn’t always like this, but the braided line has come a long way in the last few years.

The first step is to wrap a couple of wraps of mono or fluoro directly on the spool. Braid is quite slick and tends to slide around on the spool. By applying some mono/fluoro, the braid will have something to bite into. It only takes a couple of wraps to cover the spool. If you prefer, you could also use electrical tape.

Then, take your braid (I usually use Sufix 832), thread it through the first eyelet, and secure it to the backing material. I typically use the Double Uni knot, which has always held up well (video below). You don’t have to use that knot, but make sure you connect them securely (since the braid slips). You should then tension the fishing line and begin reeling. Check that your cable does not crisscross or dig into the layer beneath it. Otherwise, you’ll be untangling more than fishing. Ensure a 1/8-1/16 inch gap between the line and the spool.

The last step is to connect your fluorocarbon leader (I usually use Seaguar Red Label). The length is up to you, but ensure your knot does not reach your spool. I typically put 5-6 feet of fluoro on the end of my line and replace it when it gets to be less than 2 feet. Attach your favorite lure or hook/bait, and you’re ready to go.

Benefits Of Fluoro

What Is Fluorocarbon?

Fluorocarbon is a broad class of compounds that includes organics made of fluorine, chlorine, and carbon and synthetics made from hydrocarbons. It has been used in everything from Teflon to Freon. It is associated with polyvinylidene difluoride in the fishing world (PVDF for short). It is extruded in a single strand, much like nylon monofilament. The line is denser and noticeably heavier in size because fluorocarbon molecules are more tightly packed. It also differs from mono in terms of visibility, stretch, and durability, which impact how it performs in the water.

Benefits Of Fluorocarbon

Low Visibility—One of the most significant advantages of fluorocarbon is that it is nearly invisible underwater. This is because it doesn’t distort light passing through the line significantly (it has almost the same refractive index as water), which is essential in clear water and when targeting skittish fish.

Abrasion Resistance—The low visibility of fluorocarbon allows anglers to use heavier pound test lines in situations such as heavy cover tactics for bass. As a bonus, it has incredible abrasion resistance. It has quickly become a top choice of pros when fishing thick cover or dragging baits along the bottom.

Sensitivity—Fluoro’s packed molecules transmit more energy than mono, allowing you to better communicate information from the other end of the line, such as light bites or your lure ticking bottom. Fluoro sinks faster than mono, resulting in less slack or bow between the interest and the rod tip.

Toughness—Compared to standard nylon monofilament of the same diameter, fluorocarbon is more abrasion-resistant. Furthermore, while the sun’s harsh ultraviolet rays weaken nylon over time, fluorocarbon is unaffected by UV.

Fluoro, unlike mono and some superlines, does not absorb water. This means it has the same strength, sensitivity, and handling properties beneath the surface as it does above. It feels and behaves the same on your first and last casts.

Hooking Strength—Fluorocarbon, which lacks the low-end stretch of nylon mono, provides more solid hooksets over longer distances. This is essential if you must drive the hook home at the end of a long cast.

Fluorocarbon has the same diameter as nylon monofilament with the same breaking strength. However, because fluoro is so difficult for fish to see, you can increase the pound test for added strength and abrasion resistance without spooking line-shy fish.

Conclusion

This article answers the question: can you put fluorocarbon on a baitcaster? to the consumers. Fluorocarbon is excellent for presentations requiring low visibility, strength, hook setting power, and sensitivity. A super line is unbeatable if near-zero stretch and ultra-thin line diameters are critical to the production. On the other hand, a fluorocarbon leader dramatically reduces the possibility of spooking line-wary fish. So, this article has successfully answered your question: Can you put fluorocarbon on a baitcaster?

Read more: https://myfishingskill.com