The right fishing line is a crucial thing for a successful walleye jigging. Sensitivity is the game’s key with most walleye fishing applications because of subtle walleye bites.
Therefore, you need to use a line to feel everything going on with your jig. It must be a line that can help you catch up with any signal of a walleye bite, even if it is the slightest nudge or tap, is required.
So what is the best fishing line for this aim?
Here is the answer:
The best fishing line for walleye jigging combines an 8 to 10 lb test braided mainline and a 6 to 8 lb test fluorocarbon leader. Those are tied together. As the braided line is made of a material with almost no stretch, even the subtlest walleye bites can be felt, and also the hook can be set effectively, especially at a long distance.
More details are given below. Let’s dive into them so that you can choose the right line for your wish.
What fishing line is the best for walleye jigging?
For walleye jigging, there are three types of fishing lines: braid, monofilament, or fluorocarbon, and among them, braided line is the star; most walleye anglers use it for this purpose.
Benefits of braid for jigging
Braid is a good ideal for this type of fishing for many reasons, but the main reason is that the braided line has almost no stretch.
First, its lack of stress makes even the slightest nudges or tugs on your jig present to you by transmitting vibrations through the line and then into your rod. A walleye bite is often a short tap, or it may even seem as if some plants got exposed to the jig. Its sensitivity to the bites is essential for walleye fishing because their bites are very subtle in most cases.
For this purpose, the braided line shows a big advantage over monofilament, as monofilament has a lot of stretches. We can not tell you much about what’s going on with your jig, especially with a 30 feet deep or more walleye fishing.
Second, a braided line doesn’t have stretch benefits when setting the hook. The strike force will go directly from the rod to the hook. In monofilament, however, a lot of the force of the hook set tends to be absorbed due to stretching. As a result, short strikes are produced, and fish can not be hooked.
When to use monofilament for jigging
Monofilament can be a good choice only when fishing walleye in shallow water. In this case, the distance between you and the fish is shorter, and you can find it easier to feel the fish bites.
Then, the stretch of monofilament gives the walleye a little more time to swallow your bait before they can feel the resistance of the rod when you set the hook. This turns out to be an advantage in this case.
Best fishing line for vertical walleye jigging
Braid is the best line for vertical fishing. Jigging is commonly done in 30 to 40-foot deep water; you have to feel subtle fish bites at that distance. It is perfect for this since the braid has no stretch. Monofilament, in contrast, has extra stretch, so there is no need to set the hook in advance. You should only choose monofilament if you’re jigging in 15 feet of water or less.
What pound test should be used for walleye jigging?
The risk of them getting snagged in the cover is small because walleye don’t fight intensely, and you almost always catch them in open water.
The leader line should always be slightly lower in strength than the main line. If your jig gets snagged on structure, the leader can be broken without affecting the mainline, and then you tie another leader to keep on fishing.
Should a leader be applied when jigging for walleye?
The answer is definitely yes because a braided mainline is almost visible underwater, which can prevent walleye bites, especially in clear water. In the case of fluorocarbon, which is almost invisible underwater, you can tie a 1 to 4-foot fluorocarbon leader to solve this issue.
Lower in strength than the mainline is another advantage of using a leader. If only your jig gets snagged, your leader will be broken.
How to set up fishing line for walleye jigging
The first step is spooling your spinning reel with a test braided mainline, 8 to 10 lb. Then let the line through the guides of your rod and tie it to a size 12 barrel swivel to make a uni knot (or an improved clinch knot).
Next, tie a 6 to 8 lb test fluorocarbon leader to the other swivel eye. The leader can be between 12 inches to 4 feet at any length. Then use either a uni knot or an improved clinch knot to tie your jig to the other end of the leader, and you are done.
It is necessary to use a swivel between your mainline and leader, as the jigs can produce many twisted lines. Also, the line twist propagating to your mainline is avoided by using a swivel. Your line is often wrapped or tangled in case there is a swivel.